To avoid customs charge problem for you, will declare low value for the package. Contact me by ebay message if you didn’t receive in time If you have any concern after you got your order, let me know and I will fix as best as I can to make you a happy purchasing experience Accept return/exchange within 2 weeks if you save the item in original condition For Leatherman DIY Accessorios Thumb Grip Tabs Aluminum alloy CNC for Free P2 & P4 The thickness of the saw is relatively thin, and the thickness of the knife is relatively thick, so a special model for saws has been developed, please purchase it according to your needs. Installation Notes: This product is made of high-precision CNC machining. Because the workmanship of the Leatherman knife hole is not smooth and inconsistent, some can be easily installed, and some cannot be easily installed. If it is not easy to install, you can use a rubber mallet, or the end of a screwdriver, or pad a soft object, and tap it for installation. It is easy to install and does not require a lot of force（If the size of Thumb Grip is too small, it will shake after installation） The installation hole of the saw is small and thin. It must be processed with a file during installation to successfully install it, and it will affect the work of the saw after installation. Therefore, it is not recommended to install it on a saw. Short Description : These thumb buckles are suitable for Leatherman FREE P2 P4. Not compatible with Leatherman FREE T2 or T4. (There are exclusive products developed for T2 or T4) Design: If you have a Leatherman P2 or P4, then you know that the thumb hole that opens the blade may be very sharp. They are also sometimes difficult to grasp or unfold with gloves. These sturdy aluminum thumb buckles are designed to solve this problem. Consider the thickness of the blade and the fit of the tool. The tabs are slightly higher than the surface of the tool. Aluminum alloy CNC material, sturdy and durable. The groove is not only inconvenient to open, but it can also be installed with a 1.5*6mm tritium tube (tritium tube is very expensive, please buy it yourself or look for other substitutes) To facilitate installation, a T6 screwdriver is given to the customer by default The thickness of the saw is relatively thin, and the thickness of the knife is relatively thick, so a special model for saws has been developed, please purchase it according to your needs. CNC high precision production We have encountered a situation where it cannot be installed smoothly because of burrs on the knife edge. You can use a rubber hammer or put a towel on it, and you can smash it in with moderate force. You can also use sandpaper or a small file to lightly sand the inner hole of the knife. It can be installed very smoothly Weight：About 3g Content：1 Pcs Made in China New. Never Used .This item is exactly as pictured and does They don’t emit light, you need to buy a tritium tube yourself The pliers and tritium tube in the picture are displayed products and are not included Regarding Payment: Payments must be done within 5 days after purchase We will report to eBay if the order is not completed About Shipping: To USA : Shipped by Speed PAK About 10-21 business days To Canada : Shipped by Speed PAK About 10-21 business days To Russia : Shipped by Speed PAK About 15-30 business days To Australia : Shipped by Speed PAK About 10-21 business days To Europe : Shipped by Speed PAK About 10-21 business days To Asia : Shipped by China Post About 7-14 business days To South Africa : Shipped by China Post About 40-50 business days To South America : Shipped by China Psot About 40-50 business days Return Policy: Return or exchange is acceptable Only when product is defective upon arrival product is damaged upon arrival product is incorrect because of seller’s mistake Shipping cost is not refundable buyer bears the return freight All returns must be in original boxes with all accessories included For more information, please contact us Terms and Conditions : The price is NOT including the custom tax of your country All the import tax and duties will be paid by buyers If you have any inquiry, please do not hesitate to contact us before you place the order Sincerely looking forward to your patronage! I like bicycles I sincerely showcase my products All the photos are taken by myself independently.

To avoid customs charge problem for you, will declare low value for the package. Contact me by ebay message if you didn’t receive in time If you have any concern after you got your order, let me know and I will fix as best as I can to make you a happy purchasing experience Accept return/exchange within 2 weeks if you save the item in original condition For Leatherman DIY Accessorios Thumb Grip Tabs Aluminum alloy CNC for Free P2 & P4 ARC The thickness of the saw is relatively thin, and the thickness of the knife is relatively thick, so a special model for saws has been developed, please purchase it according to your needs. Installation Notes: This product is made of high-precision CNC machining. Because the workmanship of the Leatherman knife hole is not smooth and inconsistent, some can be easily installed, and some cannot be easily installed. If it is not easy to install, you can use a rubber mallet, or the end of a screwdriver, or pad a soft object, and tap it for installation. It is easy to install and does not require a lot of force（If the size of Thumb Grip is too small, it will shake after installation） The installation hole of the saw is small and thin. It must be processed with a file during installation to successfully install it, and it will affect the work of the saw after installation. Therefore, it is not recommended to install it on a saw. Short Description : These thumb buckles are suitable for Leatherman FREE P2 P4 ARC Not compatible with Leatherman FREE T2 or T4. (There are exclusive products developed for T2 or T4) Design: If you have a Leatherman P2 or P4, ARC then you know that the thumb hole that opens the blade may be very sharp. They are also sometimes difficult to grasp or unfold with gloves. These sturdy aluminum thumb buckles are designed to solve this problem. Consider the thickness of the blade and the fit of the tool. The tabs are slightly higher than the surface of the tool. Aluminum alloy CNC material, sturdy and durable. The groove is not only inconvenient to open, but it can also be installed with a 1.5*6mm tritium tube (tritium tube is very expensive, please buy it yourself or look for other substitutes) To facilitate installation, a T6 screwdriver is given to the customer by default The thickness of the saw is relatively thin, and the thickness of the knife is relatively thick, so a special model for saws has been developed, please purchase it according to your needs. CNC high precision production We have encountered a situation where it cannot be installed smoothly because of burrs on the knife edge. You can use a rubber hammer or put a towel on it, and you can smash it in with moderate force. You can also use sandpaper or a small file to lightly sand the inner hole of the knife. It can be installed very smoothly Weight：About 3g Content：1 Pcs Made in China New. Never Used .This item is exactly as pictured and does They don’t emit light, you need to buy a tritium tube yourself The pliers and tritium tube in the picture are displayed products and are not included Regarding Payment: Payments must be done within 5 days after purchase We will report to eBay if the order is not completed About Shipping: To USA : Shipped by Speed PAK About 10-21 business days To Canada : Shipped by Speed PAK About 10-21 business days To Russia : Shipped by Speed PAK About 15-30 business days To Australia : Shipped by Speed PAK About 10-21 business days To Europe : Shipped by Speed PAK About 10-21 business days To Asia : Shipped by China Post About 7-14 business days To South Africa : Shipped by China Post About 40-50 business days To South America : Shipped by China Psot About 40-50 business days Return Policy: Return or exchange is acceptable Only when product is defective upon arrival product is damaged upon arrival product is incorrect because of seller’s mistake Shipping cost is not refundable buyer bears the return freight All returns must be in original boxes with all accessories included For more information, please contact us Terms and Conditions : The price is NOT including the custom tax of your country All the import tax and duties will be paid by buyers If you have any inquiry, please do not hesitate to contact us before you place the order Sincerely looking forward to your patronage! I like bicycles I sincerely showcase my products All the photos are taken by myself independently.

To avoid customs charge problem for you, will declare low value for the package. Contact me by ebay message if you didn’t receive in time If you have any concern after you got your order, let me know and I will fix as best as I can to make you a happy purchasing experience Accept return/exchange within 2 weeks if you save the item in original condition For Leatherman DIY Accessorios Thumb Grip Tabs Aluminum alloy CNC for P2 P4 ARC The saw and the file are not interchangeable, they are of different sizes Weight：About 3g Content：1 Pcs Made in China New. Never Used .This item is exactly as pictured and does They don’t emit light, you need to buy a tritium tube yourself The pliers and tritium tube in the picture are displayed products and are not included Regarding Payment: Payments must be done within 5 days after purchase We will report to eBay if the order is not completed About Shipping: To USA : Shipped by Speed PAK About 10-21 business days To Canada : Shipped by Speed PAK About 10-21 business days To Russia : Shipped by Speed PAK About 15-30 business days To Australia : Shipped by Speed PAK About 10-21 business days To Europe : Shipped by Speed PAK About 10-21 business days To Asia : Shipped by China Post About 7-14 business days To South Africa : Shipped by China Post About 40-50 business days To South America : Shipped by China Psot About 40-50 business days Return Policy: Return or exchange is acceptable Only when product is defective upon arrival product is damaged upon arrival product is incorrect because of seller’s mistake Shipping cost is not refundable buyer bears the return freight All returns must be in original boxes with all accessories included For more information, please contact us Terms and Conditions : The price is NOT including the custom tax of your country All the import tax and duties will be paid by buyers If you have any inquiry, please do not hesitate to contact us before you place the order Sincerely looking forward to your patronage! I like bicycles I sincerely showcase my products All the photos are taken by myself independently.